CE Certified Horizontal Wind Turbine 1KW 48V With Flange Connection For Home Use

Wind turbines work on a simple principle: instead of using electricity to make wind—like a fan—wind turbines use wind to make electricity. Wind turns the propeller-like blades of a turbine around a rotor, which spins a generator, which creates electricity.

The terms "wind energy" and "wind power" both describe the process by which the wind is used to generate mechanical power or electricity. This mechanical power can be used for specific tasks (such as grinding grain or pumping water) or a generator can convert this mechanical power into electricity.

According to experts, a small "hybrid" power system combines home generation and home solar power (photovoltaic or photovoltaic) technologies, with some different energy sources than any single system.

The sunniest hours of the day in the U.S. run the longest in the region at the time, with wind speeds and varying lengths of time. , so the hybrid system is more likely to generate electricity when you need it.

Hybrid systems are self-contained, running "mostly off-grid" from both and power generation systems, where wind power is not connected to the grid system. The battery can be powered if the battery is running low.

Feature

1. Low Start-up Wind Speed
2. Three Blades
3. Flange Connection with easy installation
4. Certified with CE,ROHS and ISO 9001 2000
5. Customized Colors
6. High-efficiency Three Phase PMG Generator

Application

1. Marine,&Boat

2. Streetlights

3. Home, Openning Plaza lighting.

4. Wind&Solar Hybrid System

5. Monitoring device

6. Factory

What is the best material for wind turbine blades?

Most blades are made of glass fiber reinforced polyester or epoxy resin. Carbon fiber or Kevlar is also used as reinforcement. Nowadays, the possible use of wood compounds, such as wood epoxy or wood fiber epoxy, is being studied.

How many blades are best for a wind turbine?
Generally, most horizontal axis wind turbines have three blades. The decision to design a three blade turbine was a compromise. Due to its reduced resistance, the single blade design is the best number to achieve maximum efficiency,hwever,one-blade design makes the whole set of wind turbine generator not stable.

How can you increase the efficiency of a wind turbine?
Doubling the diameter of turbine blades will increase the available power of wind energy by four times. Therefore, if the wind speed is low, larger diameter turbine blades are needed to obtain the maximum wind power efficiency.

Why are 3 blade turbines preferred?
For three blades, the angular momentum remains constant, because when one blade is upward, the other two point to an angle. So the turbine can rotate with the wind.

What happens if a wind turbine spins too fast?

On the other hand, if the wind turbine rotates too fast, it may cause mechanical damage; And two create a "wall" to resist the wind to safely rotate the turbine to generate electricity. Most wind turbines have a maximum speed at which they can operate normally.

Will adding more blades to a windmill make it go faster?

Larger and longer turbine blades mean higher aerodynamic efficiency. Generating more electricity in a turbine means less energy is lost when it enters the transmission system and from there into the generator.

Why do some wind turbines not turn?
But why do you see that a stationary wind turbine may not turn? It is mainly for one of the following two reasons: they are being maintained or need to be maintained. The wind is not strong enough for them to operate, or the wind is too strong for them to operate

Company Profile

Jiangsu Shenghuang New Energy Technology Co..Ltd. is located in Wuxi Liangxi district Jinshan North science and Technology Industrial Park, is a factory commitment to wind generators, solar monitoring system, wind and solar complementary monitoring system, photovoltaic system, wind and solar complementary controller,inverter,Gel battery, Lithium Battery Development and integrated application of green energy saving and environmental protection technology enterprises.

Focus on the development of solar power, wind-solar power generation system integration,the business consists of wind and solar monitoring system, Wind Turbine Grid and off-grid system PV system equipment design and procurement, complete sets, feasibility study and installation commissioning .